Miller® by Honeywell - Söll MultiRail Horizontal Aluminum Rail Installation
Miller® by Honeywell - Söll MultiRail Horizontal Aluminum Rail - Installation of Rail Junctions
Miller® by Honeywell - Söll MultiRail Rail Shuttle
Miller® by Honeywell - Söll MultiRail Aluminum Rail Locking Bracket
Miller® by Honeywell - Söll MultiRail Horizontal Aluminum - Rail Cutting
Miller® by Honeywell - Söll MultiRail Horizontal Rail - Side Deflection Test
Miller® by Honeywell - Söll MultiRail - Product Video
Söll MultiRail Standard Roof System - Manufactured In Stainless Steel or Aluminum
Söll MultiRail Stainless Steel Systems
Söll MultiRail Stainless Steel system offers an adapted solution for any industrial building or wind energy turbine.
Various fixation possibilities are available for different structures. Just a few bolts and tools are required for a quick and easy assembly of the rail system.
Söll MultiRail provides fall protection for up to 6 workers across a maximum span of 6m, depending on the rail configuration. If a fall occurs, this effective system ensures that structural damage is prevented through energy absorption by the several intermediate brackets and the end-fixing devices.
Four different runners ensure smooth movement of the worker along the rail: closed runner for frequent use of the same rail, openable runner for flexible use on several rail systems, wheeled runner for overhead applications and a lockable runner for working situations where the shuttle should not move.
Robust rail system that is quick and easy to install
In case of a fall, the energy is reduced by the bending of the rail, thereby the structure remains protected. The low friction mounting brackets transmit in the event of a fall the absolute minimum impact to the structure. In conformity with the EN795:2012 standard, the rail can absorb forces up to 70 kg without permanent deformation.
The rail is not fixed into mounting brackets and therefore compensates for thermal expansion. Easy connection of curves and T-junctions allow the system to be easily customized to any structure.
A worker connected to the Söll MultiRail system can pass safely along vertical sections up to 1 m high.
The Söll MultiRail horizontal anchor device is often used in the following sectors:
• Storefronts
• Flat or steep roofs
• Working platforms on masts and buildings
• Hangars, shipyards, cranes
• Industrial plants
• Wind nacelles
• Water treatment
Söll MultiRail can also be used as an overhead solution in combination with a self retractable lifeline attached to a wheeled shuttle for example in following applications:
• Truck cleaning
• Maintenance
• Loading bay
Suitable for working in suspension
The system is suitable for working in suspension under the following conditions:
• Up to 2 users in the system
• The structure is rigid enough that no deformation occurs during usage
• Connection to two wheeled overhead mobile anchor points (shuttles), one for suspension and one for fall protection
Recommended Industries/Use
- Construction
- Manufacturing
- Oil and Gas
- Transportation
- Utilities
- Nuclear
- Wind Energy
Hazards
- Fall from height
Regulations
- Conforms to EN 795:2012 type D standard
Proper product training and professional fall protection training is recommended.
Refer to Product Use Instructions enclosed with products.
Söll Xenon is only available for Miller trained professional installers.
Proper product training and professional fall protection training is required.
Refer to Product Use Instructions enclosed with products.
Warranty Information
We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous test to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse. Our warranty does not apply to abusive treatment of the product. In the unlikely event that you should discover defects in either workmanship or materials, under our warranty of one year after delivery, we will repair or replace the product at our expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted
Söll MultiRail® Aluminium Systems
The Söll MultiRail® Aluminium Horizontal Rail System conforms to the latest European standard EN 795:2012 type D and CEN/TS 16415:2013 regulations for horizontal anchor devices. Söll MultiRail Aluminium is not only for installation at foot level or overhead but can also be installed sideways for use as a handrail. The high quality aluminium system provides the best price-quality solution for low-corrosive work environments.
Söll MultiRail Aluminium System offers an adapted solution for any industrial building or wind energy turbine. The elegant design of the aluminium solution makes it an aesthetic safety solution for commercial and historical buildings.
Various fixation possibilities are available for different structures. Just a few bolts and tools are required for a quick and easy assembly of the rail system.
Söll MultiRail Aluminium provides fall protection for up to 6 workers across a maximum span of 6m, depending on the rail configuration. If a fall occurs, this effective system ensures that structural damage is prevented through energy absorption by the several intermediate brackets and the end-fixing devices.
Four different runners ensure smooth movement of the worker along the rail: closed runner for frequent use of the same rail, openable runner for flexible use on several rail systems, wheeled runner for overhead applications and a lockable runner for working situations where the shuttle should not move.
Robust rail system that is quick and easy to install
In case of a fall, the energy is reduced by the bending of the rail, thereby the structure remains protected. The low friction mounting brackets transmit in the event of a fall the absolute minimum impact to the structure. In conformity with the EN795:2012 standard, the rail can absorb forces up to 70 kg without permanent deformation.
The rail is not fixed into mounting brackets and therefore compensates for thermal expansion. Easy connection of curves, T- and X-junctions, allow the system to be easily customized to any structure.
A worker connected to the Söll MultiRail Aluminium system can pass safely along vertical sections up to 1 m high.
The Söll MultiRail Aluminium horizontal anchor device is often used in the following sectors:
• Flat or steep roofs
• Working platforms on masts and buildings
• Hangars, shipyards, cranes
• Industrial plants
• Wind nacelles
• Water treatment
Söll MultiRail Aluminium can also be used as an overhead solution in combination with a self retractable lifeline attached to a wheeled shuttle for example in following applications:
• Truck cleaning
• Maintenance
• Loading bay
Hazards
- Fall from height
Regulations
- Conforms to EN 795:2012 type D standard
Proper product training and professional fall protection training is recommended.
Refer to Product Use Instructions enclosed with products.
Söll Xenon is only available for Miller trained professional installers.
Proper product training and professional fall protection training is required.
Refer to Product Use Instructions enclosed with products.
Warranty Information
We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous test to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse. Our warranty does not apply to abusive treatment of the product. In the unlikely event that you should discover defects in either workmanship or materials, under our warranty of one year after delivery, we will repair or replace the product at our expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted
